Concrete Resurfacing Gold Coast
Tired, faded or cracked concrete doesn’t always need replacing. Concrete resurfacing on the Gold Coast and the Tweed applies a thin coating system over the existing slab to restore the look, the colour and the slip resistance — at a fraction of the cost of demolishing and starting again. On a residential driveway, the result holds up for 10 to 15 years.
Resurfacing applies to existing concrete only — driveways, patios, paths, pool surrounds and commercial floors that need restoring rather than replacing.

Where Concrete Resurfacing Works Best
Concrete resurfacing suits most residential and light-commercial concrete surfaces. The most common applications across the Gold Coast and the Tweed:
Driveway Resurfacing
The most common job. Covers fading, hairline cracking and outdated stencil patterns on standard residential driveways.
Patio Resurfacing
Entertaining areas, alfresco zones and outdoor dining surfaces. Slip-resistant finishes are standard.
Path Resurfacing
Front paths, side access and walkways. Fast turnaround, minimal disruption.
Pool Surrounds Resurfacing
Heat-reflective light colours and P5-rated slip resistance for safe, cool pool decks.
Every application uses the same five-step preparation and coating process — the difference is the finish chosen and the substrate condition.
Concrete Resurfacing Finishes and Coating Systems
Concrete resurfacing comes in four main finishes, each suited to a different look and use:
Covercrete & Spraycrete
The base spray-applied system in a plain block colour. The most cost-effective finish, suited to driveways, paths and high-traffic areas where a clean, uniform surface is the goal.
Textured Concrete
splatter, orange peel and flecked finishes that add grip and hide hairline cracks. Common on driveways and pool surrounds.
Decorative Concrete
Custom colour and pattern combinations for homeowners who want a finish tailored to the property rather than a standard block colour.
Stencilled Concrete
Patterns laid over the base coat to mimic brick, cobblestone, tile or custom designs. Best on driveways, patios and entryways.
Two coating systems are used across these finishes. Shieldcoat Step Safe Heavy Duty is the system used for all non-stencil work — a premium acrylic, anti-mould coating with a P5 anti-slip rating (the highest available), 33 standard colours, custom tinting on request, and a 7-year Shieldcoat manufacturer warranty against flaking, peeling and cracking under normal use. Dulux Avista is used for stencilled finishes, where it is the better-suited system for stencil work.
How Concrete Resurfacing Works
Every concrete resurfacing job follows the same five-step process, regardless of whether the finish is plain coloured, textured, decorative or stencilled.
The existing concrete is pressure-washed to remove dirt, grease and surface contaminants. Proper surface preparation is the single biggest factor in how long the finish lasts.
Any cracks or surface damage are repaired before coating begins. Hairline cracks up to about 3mm are repairable; wider cracks or signs of slab movement need to be assessed separately.
A bonding primer is applied across the prepared surface to ensure adhesion between the slab and the resurfacing coats.
Three coats of the chosen system are applied. For stencilled finishes, stencils are laid during this stage before the final coat goes down.
Two coats of clear sealer are applied as the final step, providing UV, stain and wear protection.
Why Choose Spray Your Concrete for Concrete Resurfacing?
Spray Your Concrete is a family-owned concrete resurfacing company on the Gold Coast, established in 2012. Free on-site quotes are available across the full service area.
QBCC-Licensed
Spray Your Concrete holds QBCC Licence #1205294 — the licence Queensland law requires for regulated building work. A basic check any homeowner should run before hiring a concrete contractor.
Twenty Years of Experience
The owner has twenty years of industry experience and applies the resurfacing systems on most jobs personally. No quoting and walking away.
Superior Coating Systems
Every job uses Shieldcoat Step Safe Heavy Duty or Dulux Avista — chosen to suit the finish, not the cheapest mix on the day.
7-Year Manufacturer Warranty
Shieldcoat backs Step Safe Heavy Duty with a 7-year warranty against flaking, peeling and cracking under normal use. The product warranty applies on every non-stencil resurfacing job.
Get a Quote on Your Resurfacing Project
Free on-site quotes are available across the Gold Coast and the Tweed for driveways, patios, paths, pool surrounds and commercial concrete. Every job is assessed and priced on-site before any work is booked — no obligation.
QBCC #1205294 · Family-owned, established 2012















































